AV-HS410 Panasonic Agrandir l'image

AV-HS410 Panasonic

AV-HS410

Mélangeur vidéo numérique  AV-HS410 8 entrées HD-SDI et 2 entrées DVI-D Panasonic

Description

Description

PowerRequirement: AC100Vto240V,50Hz/60Hz,88W 

Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F) 

Operating Humidity: 10 % to 90 % (no condensation) 

Dimensions: 440 mm x 158 mm x 361 mm

Weight: 

Approx. 6.2 kg (13.669 lb)
excluding accessory parts when no options have been installed
Approx. 6.6 kg (14.550 lb)
excluding accessory parts when all the possible options have been installed 

Video Inputs (13 signal lines maximum):
Standard SDI: 8 signal lines, BNC x 8 (SDI INPUT 1 to SDI INPUT 8)

(The up-converter function can be used for the SDI INPUT 5 to SDI INPUT 8 connectors.)

Standard DVI-D: 1 signal line, DVI-D x 1
Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2) (Up to two option boards can be installed in the two input/output slots.) 

Video Outputs (10 signal lines, maximum):
Standard SDI: 5 signal lines, BNC x 6 

(SDI OUTPUT 1 to SDI OUTPUT 5 x 1 line each, 2 distributed outputs for SDI OUTPUT 1 only)

Standard DVI-D: 1 signal line, DVI-D x 1
Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)

• PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI-D OUT, OUT A1, OUT A2, OUT B1 and OUT B2.

• CLN can be pre-selected from KEY or DSK using a menu. (Up to two option boards can be installed in the two input/output slots.) 

Signal Formats: 

SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*,

1080/23.98PsF*
*The following option boards are not supported: AV-HS04M1, AV-HS04M2, AV-HS04M3, AV-HS04M4, AV-HS04M5, AV-HS04M6, AV-HS04M7 

Signal Processing: Y: PB: PR 4: 2: 2, 10 bit (8 bit for video memory), RGB 4:4:4, 8 bit 

SDI INPUTS : 

HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
8 signal lines, standard: IN1 to IN8
12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through) HD: SMPTE 292M (BTA S-004B) standard complied with

•0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer More than 100 m (328 ft)

(when 1.5 Gbps/5C-FB cable is used) SD: SMPTE 259M standard complied with

•0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used) 

SDI OUPUTS : 

HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
5 signal lines, standard: OUT1 x 2; OUT2 to OUT5 x 1 each 9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M7 boards are used)
HD: SMPTE 292M (BTA S-004B) standard complied with 

• Output level
• Rise time
• Fall time
• Difference between rise time and fall time

SD: SMPTE 259M standard complied with

• Output level
• Rise time
• Fall time
• Difference between rise time and fall time

0.8 V [p-p] ± 10 % HD: Less than 270 ps HD: Less than 270 ps

• Alignment jitte
• Timing jitter
• Eye aperture ratio • DC offset

HD: Less than 100 ps
HD: Less than 0.2 UI (130 ps) HD: Less than 1.0 UI
More than 90 %
0 ±0.5 V 

Less than 0.5 ns • Jitter Less than 0.2 UI 

DVI-D INPUTS : 

Analog/digital RGB:

XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz

Digital RGB: 1080/50p, 1080/59.94p
• Analog input signals are not supported.
• This connector does not support the HDCP technologies.

4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M8 boards are used)

• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to

5 m (16.4 ft). 

Reference Input Output : 
  1. In GENLOCK mode: Black burst or Tri-level Sync input signals (with loop-through)
    In internal sync mode: Black burst output signals x 2

    • Same field frequencies as those of the system formats supported. • With the 1080/24PsF format, only GENLOCK mode supported.
    • With the 1080/23.98PsF format, black burst with 10F-ID

    (SMPTE318M standard met) or TRI signals supported. 

Vidéo Time Delay : 

  1. 1 line (H), When the frame synchronizer setting is “Off” and the up-converter setting is “Off”.
    1 frame (F), When the frame synchronizer setting is “On” or the up-converter setting is “On”.

    • When the signals have passed through PinP, DVE, multi view, down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is applied in each case. 

Control I/O (LAN) : 

  1. RJ-45
    LAN 10BASE-T/100BASE-TX (For IP control)

    Connecting cable: LAN cable (category 5 or above), max. 100 m [328 ft], STP (Shielded Twisted Pair) cable recommended

  • When connecting to a hub (switching hub), use a straight cable.

    Use a crossover cable when connecting the unit and computer on a

    1:1 basis without going through a hub.

  • Use with the same segment is recommended for the equipment

    which is connected to the unit. If the unit is connected to equipment whose segments are different, events dependent upon the settings inherent to the network equipment, for instance, may occur so thoroughly check the connections with the equipment to which the unit will be connected prior to the start of operation. 

250,00 € HT

Suggestions